formValues

We’ve provided some standard outputs for your ease of use. You can enter custom outputs between 1000 and 3500lm/m in here (outputs in that range are standard for us). Feel free to get in touch with your local ENERGYLINE partner for other requirements.

action-curves-on-click-custom-output

Curves Custom Lumen Outputs

The percentages we’ve provided for the indirect output are in addition to the direct output.

Your selected output for the indirect lighting component is equivalent to [populate based on selection] lm/m

That brings your total luminaire output to [populate based on selection] lm/m.

action-curves-on-click-indirect-lighting

Total Luminaire Output

Your selected output for the indirect Ceiling Wash is equivalent to [populate based on selection] lm/m

action-microprism-on-click-indirect-lighting

action-microprism-on-click-lumen-output

Microprism Diffuser Custom Lumen Outputs

The lumen package you’ve chosen for the direct lighting component utilises our high output light engine. For a low output solution, pick something below 2200lm/m.

action-microprism-on-select-above-2200

High Output Light Engine

We’ve provided some standard outputs for your ease of use. You can enter custom outputs between 1000 and 4000lm/m in here (outputs in that range are standard for us). Feel free to get in touch with your local ENERGYLINE partner for other requirements.

action-on-click-custom-output

Ceiling Wash Custom Lumen Outputs

The lumen package you’ve chosen for the indirect lighting component utilises our high output light engine. For a low output solution, pick something below 3000lm/m.

action-on-select-above-3000

action-optics-on-click-custom-output

Optics Custom Lumen Outputs

action-optics-on-click-indirect-lighting

action-satin-on-click-custom-output

Satin Diffuser Custom Lumen Outputs

action-satin-on-select-above-2200

CCT defines the colour appearance of the fixture. 3000K is warm white, great in hospitality or social spaces while 4000K is neutral and more common place in commercial and workplace.

section-cct

What is CCT?

Our standard colours for ENERGYLINE 65 are Texture White or Black Sand. We also provide custom colour solutions, enter the description of your colour requirement here. 

Click here to view the Dulux powder coat range

section-colour

ENERGYLINE Powdercoat Colours

Energyline can be configured with DALI for individual dimming of the drivers via DALI control systems like Helvar, the dimming range with DALI is 100% to 1%.

Dependent on the length, a linear luminaire may have more than one driver and therefore more than one address.

The Casambi solution is based on Bluetooth Low Energy, the only low power wireless technology used in all modern smartphones, tablets and smartwatches. On top of Bluetooth Low Energy, the Casambi technology provides a mesh network where all the intelligence of the system is replicated in every node and, in such a way, creates a system with no single points of failure.

The Casambi app works as one of the user interfaces in a Casambi lighting control solution, as the commissioning tool and as a remote gateway. The Casambi app works with iOS as well as Android devices, like smartphones, tablets and smartwatches. The app is free to download by any end-user.

Utilising Casambi in your Energyline specification allows for easy installation and functionality, with minimal additional hardware and deployment costs.

section-control

Some advice on specifying ENERGYLINE with Curves...

section-curves-direct-lighting

Designing with Curves

Adventor provides lengths between XXX and XXXmm. 

The luminaire length you select includes end caps (6mm at each end).

ENERGYLINE 65 with Curves is available in 280mm increments, we’ll provide a couple of lengths for you to choose from that would be optimal for us to build. 

Need something different? Get in touch with your local ENERGYLINE partner. (Link to Partner web page)

section-curves-length

Luminaire Length

We’re supplying Ceiling Wash as standard for the Energyline 65 indirect component.

This linear solution provides excellent horizontal illumination across the ceiling, especially when the luminaire is suspended 600mm from the ceiling.

section-indirect-lighting

Energyline 65 Ceiling Wash

Our Microprism Diffuser in Energyline 65 is a great solution for workstation lighting. When used in outputs up to 1350lm/m, this direct lighting option can achieve UGR19.

section-microprism-direct-lighting

Designing with Microprism Diffuser

Adventor provides lengths between 872 and 39,999mm. 

ENERGYLINE 65 with Microprism Diffuser is available in 280mm increments, we’ll provide a couple of lengths for you to choose from that would be optimal for us to build. 

If you require an exact luminaire length, we’ll supply the luminaire with cover profile at each end to meet requirements.

section-microprism-length

Using ENERGYLINE with our optic selection provides controlled light to illuminate surfaces and architecture. We’ve got a few to choose from, each of these are integrated into our ENERGYLINE profile with a 0° tilt.

section-optics-direct-lighting

Designing with Optics

Adventor provides lengths between 858 and 39,999mm. 

ENERGYLINE 65 with Optics is available in 281.75mm increments, we’ll provide a couple of lengths for you to choose from that would be optimal for us to build. 

section-optics-length

There's some things you need to know about single long photometry files in your calcs.

AGi32 users: To ensure you get an accurate result in your model, use IES files and simply alter your settings to subdivide the luminaire. It's easy, here is a 20sec video to show you how. 

DIALux evo users: Do nothing, long LDT files will calc just right.

DIALux 4 users: You'll need to array multiple files (just like the old days!). Unfortunately DIALux 4 is no longer supported and will not calculate single long LDT files correctly. 

ElumTools users: We're working on it! To be on the safe side your best to array in multiple smaller IES files to calc a long piece of ENERGYLINE.

section-preview

Photometric Files

Our Satin Diffuser in Energyline 65 provides high vertical illuminance for collaborative spaces. Utilising homogenous, continuous diffuser, this direct lighting component has an efficacy of up to 110lm/W

section-satin-direct-lighting

Designing with Satin Diffuser

ENERGYLINE 65 with Satin Diffuser is available in 280mm increments, we’ll provide a couple of lengths for you to choose from that would be optimal for us to build. 

section-satin-length

section-satin-on-click-indirect-lighting

(placeholder) At vero eos et accusamus et iusto odio dignissimos ducimus qui blanditiis praesentium voluptatum deleniti atque corrupti quos dolores et quas molestias excepturi sint occaecati cupiditate non provident, similique sunt in culpa qui officia deserunt mollitia animi, id est laborum et dolorum fuga.

section-shape-curves

Lorem Ipsum

The details to include in the lighting schedule when specifying your Energyline solution.

section-spec

Your Energyline Spec

You can generate your spec now without knowing the suspension method. We’ll just need to confirm this with you later on.

Direct Lighting Specification

Light Output (Lumens per metre)

Mounting Method

Suspension Method

Indirect Lighting Specification

Length

Enter the requested length in box below (mm)

CCT

CRI

Control

Colour

Preview

Distribution

Output

CRI

CCT

Profile

Length

Mounting

Control

Colour

Details